Contact Us
01202 632868

Chockfast® Red SG

ENQUIRE
ABOUT US

Chockfast® Red SG

Chockfast® Red SG is a three component, high strength, 100% solids epoxy grouting compound which is used to grout large machinery and to support soleplates in all types of foundation designs with clearances as little as 25mm. It can be used (with a cold cure additive) when ambient temperature is below 15°C and as low as 0°C.

Chockfast® Red SG has extremely high physical properties and negligible shrinkage, making it ideal for final positioning of critically aligned equipment within close tolerances. Skid mounted compressors, extruders, turbines, pumps, motors and crane rails are just a few types of equipment supported on Chockfast® Red SG. When using Chockfast® Red SG for crane rail applications expansion joints may be placed every 3m.

Single Pour: 25mm – 100mm
Cure Time: Up to 48 hours at 15°C

ENQUIRE NOW

Downloads

Resin Safety Datasheet
Hardener Safety Datasheet
Technical Datasheet

Application

Chockfast® Red SG has the following advantages when compared to conventional cementitious grouts:

  • Impervious to oil and chemical attack
  • Cures at least three times as quickly
  • Pre-packaged unit
  • Grout machinery in final aligned position
  • Higher physical strengths
  • Strong bond to metal and concrete
  • Unaffected by weathering and freeze/thaw cycling
  • Superior resistance to fatigue

Chockfast® Red SG contains no non-reactive diluents which could interfere with the curing mechanism or which could cause material loss during or after cure. Machinery may be positioned at its final elevation before pouring because the shrinkage is negligible. Critical alignments are maintained during machinery operation due to Chockfast® Red SG's high dimensional stability and resistance to creep and vibration.

Frequently Asked Questions

Chockfast ® Orange

Cure Time
Temperature
48 hours
15°C (60°F)
36 hours
18 °C (65°F)
24 hours
21°C (70°F)
18 hours
26°C (80°F)

Chockfast ® Black

Cure Time
Temperature
48 hours
15°C (60°F)
36 hours
18 °C (65°F)
24 hours
21°C (70°F)
18 hours
26°C (80°F)

Chockfast ® Gray

Cure Time
Temperature
24 hours
18°C (65°F)
18 hours
30°C (85°F)

Chockfast ® Red

Cure Time
Temperature
54 hours
16°C (60°F)
36 hours
21 °C (72°F)
24 hours
27°C (80°F)
18 hours
32°C (90°F)

Chockfast ® Red SG

Cure Time
Temperature
24 to 48 hours
21°C (70°F)

Must be a clean, dry, oil free, and sound concrete / steel surface.

Normally available ex stock, otherwise 10 to 15 working days from receipt of written order.

Yes, on receipt of relevant foundation drawings and details of the machinery.

Yes we have fully trained technicians available to work in the UK and worldwide.

Yes, please refer to our website under products, where you will see buttons enablining you to download Safety Data Shhets (SDS) and Technical Data Sheets (TDS)

Yes, on request.

What our clients say

FMPG have used IMS (previously UK Marine Resins) for over 30 years and have always had excellent service, they are prompt and reliable. Whilst onsite they can be trusted to work in a safe and efficient manner with little or no supervision. As a company to do business with, they are our first choice in this field of work
Bernie Paul
Production Manager - Ferguson Marine (Port Glasgow) Ltd
We've been working with UK Marine Resins for several years now, and I can confidently say that their service and product quality are second to none. The Chockfast product range they supply consistently meets our expectations in terms of performance, reliability, and durability. Whether it's for engine foundations or critical alignment applications, Chockfast products has proven to be the gold standard in epoxy chocking solutions.

What truly sets UK Marine Resins apart is the extensive knowledge and hands-on experience of their team. Their technical staff are extremely well-versed in both the technical and practical aspects of marine resin systems. From the initial consultation to on-site support, their guidance is always expert and to the point. They understand the challenges of the marine sector and consistently deliver tailored solutions that work in practice.

UK Marine Resins has become a trusted partner for us, and we look forward to continuing this strong collaboration for many years to come.
Marco van 't Geloof
General Manager of DMG
We have worked with UK resins for many years now. They supply an excellent service to us, sometimes at short notice. They have carried a range of different applications for us on ships from stern tube sealing to engine and winch seats. All the teams that have attended our site have a great knowledge of the products and always see the job through, we’ve had a few late nights over the years. Anytime we have any issues with a customer who is unsure of what they need, Ron and team are at the end of the phone helping us find a solution. 
John Williams
A&P Falmouth

Some of our clients

Need a quotation? Please submit an enquiry below

GDPR*