Contact Us
01202 632868

Chockfast® Orange

ENQUIRE
ABOUT US

Chockfast® Orange

Chockfast® Orange (PR-610TCF) is a specially formulated 100% solids, two component inert filled casting compound developed for use as a chocking or grouting material. Chockfast® is designed to withstand severe marine and industrial environments involving a high degree of both physical and thermal shock. The compound is non-shrinking and has very high impact and compressive strength.

Years of successful in-service experience have shown the use of PR-610TCF to be a far superior yet less expensive method of establishing and permanently retaining precise equipment alignment under extreme conditions.

  • Designed for hot-running machinery.
  • Ideal for large slew-ring bearing installations to eliminate machining of housing.
  • Will maintain critical alignment of diesel and gas engines, compressors, gas turbines etc.
  • Eliminates machining of seating and housings

PR-610TCF is approved or accepted for its intended marine use by American Bureau of Shipping, Lloyd's Register, Bureau Veritas, Det Norske Veritas, Germanischer Lloyd and most other major regulatory agencies worldwide.

Single Pour: 12mm – 100mm
Cure Time: Up to 48 hours at 15°C

ENQUIRE NOW

Downloads

Resin SDS
610 Hardener SDS
620TS Hardener SDS
Mixing & Pouring Instructions
Technical Datasheet

Advantages

Chockfast® Orange was developed as a chocking or grouting compound for use under marine main propulsion machinery in depths of 12mm to 100mm. The compound is used under diesel and gas engines, reduction gears, generators, compressors, pumps, bearing blocks, crane rails and numerous other applications.

PR-610TCF requires no special tools or special skills as does chocking with steel. When cast, Chockfast® Orange flows readily into the chock area filling voids and conforming to all irregularities. This eliminates the machining of base plates or foundations for a perfectly fitted chock.

Frequently Asked Questions

Chockfast ® Orange

Cure Time
Temperature
48 hours
15°C (60°F)
36 hours
18 °C (65°F)
24 hours
21°C (70°F)
18 hours
26°C (80°F)

Chockfast ® Black

Cure Time
Temperature
48 hours
15°C (60°F)
36 hours
18 °C (65°F)
24 hours
21°C (70°F)
18 hours
26°C (80°F)

Chockfast ® Gray

Cure Time
Temperature
24 hours
18°C (65°F)
18 hours
30°C (85°F)

Chockfast ® Red

Cure Time
Temperature
54 hours
16°C (60°F)
36 hours
21 °C (72°F)
24 hours
27°C (80°F)
18 hours
32°C (90°F)

Chockfast ® Red SG

Cure Time
Temperature
24 to 48 hours
21°C (70°F)

Must be a clean, dry, oil free, and sound concrete / steel surface.

Normally available ex stock, otherwise 10 to 15 working days from receipt of written order.

Yes, on receipt of relevant foundation drawings and details of the machinery.

Yes we have fully trained technicians available to work in the UK and worldwide.

Yes, please refer to our website under products, where you will see buttons enablining you to download Safety Data Shhets (SDS) and Technical Data Sheets (TDS)

Yes, on request.

What our clients say

FMPG have used IMS (previously UK Marine Resins) for over 30 years and have always had excellent service, they are prompt and reliable. Whilst onsite they can be trusted to work in a safe and efficient manner with little or no supervision. As a company to do business with, they are our first choice in this field of work
Bernie Paul
Production Manager - Ferguson Marine (Port Glasgow) Ltd
We've been working with UK Marine Resins for several years now, and I can confidently say that their service and product quality are second to none. The Chockfast product range they supply consistently meets our expectations in terms of performance, reliability, and durability. Whether it's for engine foundations or critical alignment applications, Chockfast products has proven to be the gold standard in epoxy chocking solutions.

What truly sets UK Marine Resins apart is the extensive knowledge and hands-on experience of their team. Their technical staff are extremely well-versed in both the technical and practical aspects of marine resin systems. From the initial consultation to on-site support, their guidance is always expert and to the point. They understand the challenges of the marine sector and consistently deliver tailored solutions that work in practice.

UK Marine Resins has become a trusted partner for us, and we look forward to continuing this strong collaboration for many years to come.
Marco van 't Geloof
General Manager of DMG
We have worked with UK resins for many years now. They supply an excellent service to us, sometimes at short notice. They have carried a range of different applications for us on ships from stern tube sealing to engine and winch seats. All the teams that have attended our site have a great knowledge of the products and always see the job through, we’ve had a few late nights over the years. Anytime we have any issues with a customer who is unsure of what they need, Ron and team are at the end of the phone helping us find a solution. 
John Williams
A&P Falmouth

Some of our clients

Need a quotation? Please submit an enquiry below

GDPR*